Hotline : 13812932603
E-mail : yong.chen@maivismold.com

Contact Us

Contact : Chen Yong
Tel : 13812932603
E-mail : yong.chen@maivismold.com
Address : Room 3, No. 36 Dongchang Road, Bacheng Town, Kunshan City

Products Details

Nozzle

    Maivis the nozzles are available in 4 sizes, with a minimum nozzle diameter of 16mm and lengths ranging from 30mm to 300mm. There are more than 20 standard gates, including point gates, valve gates, and large nozzles. The variety of gate requirements for plastic parts; Maivis the nozzle can withstand injection pressures up to 3000 Bar.

    Unique Flange Design:

    ① Variety of special materials for different gate requirements
    ② The unique sealing structure can protect the end of the heating wire from moisture, corrosion, water and oil; heating element
    ③ Both the high pressure of the nozzle and the heat loss of the nozzle can be prevented.
    ④ The embedded type and welding sealing process ensure uniform nozzle temperature and various nozzle tip structures.

    Nozzle Model Selection:

    Select the appropriate nozzle series based on the weight of the product. If multiple nozzles are used simultaneously during injection molding, select the appropriate nozzle size based on the amount of glue that each nozzle needs to meet.



    Nozzle Model Selection

    Select the appropriate nozzle series based on the weight of the product. If multiple nozzles are used simultaneously during injection molding, select the appropriate nozzle size based on the amount of glue that each nozzle needs to meet.

    Nozzle Series

    Size

    Injection Amount / Nozzle

    Flow Path Diameter (mm)

    Open

    Valve Type

    PZCB

    small

    <50g

    6

    8

    PZDB

    medium

    50-200g

    8

    11

    PZHB

    big

    >200g

    12

    16



    Gate Form

    Maivis available in 3 gate types - point gate, large nozzle, valve gate, will meet your hot runner system requirements.
    The following two points must be considered when choosing a casting method:
    1. Requirements for the appearance of the gate
    2. Types of injection molding materials (crystalline or amorphous)

    The nozzle models corresponding to various gate forms are summarized:


    PZCB

    PZDB

    PZHB

    Pointed Gate

     

    E-type cusp gate (ET)

    √

    √

    √

    Extended E-tip point gate (EET)

    √

     

     

    F-type cusp gate (FT)

    √

    √

    √

    Extended F-type cusp gate (EFT)  

     

    √

    √

    Dashuikou

     

    Type C large nozzle (CS)

     

    √

    √

    Bimetal C-type large nozzle (BCS)

    √

    √

    √

    Straight-through large nozzle (HS)

    √

    √

    √

    Extended straight-through large nozzle (EHS)

    √

    √

    √

    Valve Gate

     

    Type C valve gate (CV)

     

     

     

    Bimetal C-valve gate (BCV)

    √

    √

    √

    Straight-through valve gate (HV)

    √

    √

    √

    Extended straight-through valve gate (EHV)

    √

    √

     

    previous item: R series nozzle